CUSTOM - CUSTOM BLEND LHT LARGE & HEAVY TILE MORTAR, 44 LB BAG
CustomBlend LHT Large and Heavy Tile Mortar offers a non-sag and non-slump solution for most interior and exterior wall and floor applications. This polymer modified mortar can be applied 3/4" thick on horizontal surfaces and can be used for large format porcelain, ceramic, and natural stone tile. Meets ANSI A118.4HT and A118.11.
Features:
- For most standard floor and wall installations
- Supports large and heavy tile for flat, even installations
- Specially formulated for large format tiles
- Good bond strength
- Approved for industry-recommended interior and exterior applications
- Approved for use with in-floor heating systems
- Exceeds ANSI A118.4HT and A118.11 standards without the need for additives
Suitable Substrates:
- Concrete, mortar beds, masonry, Portland cement plaster
- Cement backerboards
- Liquid-applied and fabric waterproofing membranes
- Crack isolation sheet membranes
- Uncoupling mats
- Substrates treated with MBP Multi-Surface Bonding Primer
- Exterior grade plywood (interior residential and light commercial dry areas)
- Gypsum wallboard (interior dry areas)
Suitable Tile Types:
- Vitreous, semi-vitreous or non-vitreous tile: ceramic, quarry, cement body tile, pavers
- Impervious porcelain
- Brick and stone veneer
- Cement-based precast terrazzo
- Gauged or un-gauged natural stone tile
Coverage:
- Longest side of tile 8" to 15" - use 1/4"x1/4"x1/4" Square-notch trowel: 75-86 sq. ft. per 44 lb bag
- Longest side of tile 8" to 15" - use 1/4"x3/8"x1/4" Square-notch trowel: 53-62 sq. ft. per 44 lb bag
- Longest side of tile more than 15" - use 1/2"x1/2"x1/2" Square-notch trowel: 37-43 sq. ft. per 44 lb bag
- Longest side of tile more than 15" - use 3/4"x9/16"x3/8" U-notch trowel: 30-33 sq. ft. per 44 lb bag