icon-account icon-glass
*Free Shipping on many items*
CUSTOMTECH - TECH MVC 100% SOLIDS EPOXY MOISTURE VAPOR CONTROL SYSTEM
CUSTOMTECH - TECH MVC 100% SOLIDS EPOXY MOISTURE VAPOR CONTROL SYSTEM
CUSTOMTECH - TECH MVC 100% SOLIDS EPOXY MOISTURE VAPOR CONTROL SYSTEM

CUSTOMTECH - TECH MVC 100% SOLIDS EPOXY MOISTURE VAPOR CONTROL SYSTEM

$197.99

THIS IS A TWO-COMPONENT SYSTEM - YOU MUST ORDER PARTS A & B

CustomTech TechMVC is a true single coat, moisture and alkali-resistant, two-component, rapid cure 100% solids epoxy coating specifically formulated to control concrete moisture vapor emission and alkalinity beneath finished flooring. Single-coat application effectively controls concrete moisture emission and creates an alkaline barrier between the substrate and adhered floor materials. TechMVC is compatible with most epoxy coatings (including epoxy terrazzo) and reactive urethane and epoxy adhesives for direct bond applications.

Features:

  • True single coat application
  • Solvent-free
  • Low viscosity formula
  • Reduces moisture vapor transmission (MVT) to less than 3 lbs when applied at the correct thickness
  • Alkaline resistant to pH 14
  • Primer-ready in 4 hours at 73°F (23°C)
  • For interior installations only

Suitable Substrates:

  • Concrete, mortar beds, and masonry.  Properly prepared sound and stable concrete substrates having a minimum tensile strength of 150 psi (when tested per ASTM C 1583 with an MVER up to 25 lbs per 1,000 sq. ft. per 24 hours, and/or RH up to 100%)

Approximate Coverage:

  • Slab on ground:  450 sq. ft. per unit, equivalent to a minimum thickness of 8 mils for a warranted system.
  • Suspended slab:  730 sq. ft. per unit, equivalent to a minimum thickness of 5 mils for a warranted system.

    Technical Data Sheet